How To Setup - Samsung Galaxy Gear

How To Setup - Samsung Galaxy Gear
How To Setup - Samsung Galaxy Gear

Learn how to setup your Samsung Galaxy Gear. These steps take you through an out-of-the-box setup process. These procedures are intended to help you get your device setup, activated, and assist you with your initial connection.

Charging the Battery

  • Your device is powered by an internal rechargeable Li-ion battery. Use only approved chargers with this device. Ask your local Samsung dealer for further details.

Note: It is recommended you fully charge the battery before using your device for the first time.

Note: If the battery is completely discharged, the device cannot be turned on. Allow a depleted battery to charge for a few minutes before turning on the device.

  • Before turning on your Galaxy Gear for the first time, charge it fully.
  • In a single motion, slide and hold the switch (1) to open the Charging cradles protective cover

  • Carefully place the device onto the cradle (3), making sure to align the connector plates to the charging pin
  • Firmly close the cover

  • Insert the power plug into a compatible electrical outlet.

  • Insert the USB connector into the Charging cradles charger jack.

Note:Connecting the charger improperly may cause serious damage to the device. Any damage caused by misuse is not covered by the warranty.

  • Plug the charging head into a standard AC power outlet. The device turns on and indicates its charge state.

Note: While charging, you cannot use calling features, voice recorder, and camera.

  • When charging is finished, first unplug the chargers power plug from the AC wall outlet, then disconnect the chargers connector from the device.

Help Us Grow

If you like this post, please share it with your friends.

You are free to copy and redistribute this article in any medium or format, as long as you keep the links in the article or provide a link back to this page.

Subscribe to our mailing list

You may also like...